£0.00View All
(0) Shopping Cart
US DollarEuroAustralian DollarIndian RupeeNorwegian KroneCanadian DollarPound SterlingYuan RenminbiNew Zealand DollarDanish KroneHong Kong DollarYenKenyan ShillingKuwaiti DinarRandSwiss FrancMalaysian RinggitMexican PesoNairaZlotyRussian RubleSaudi RiyalSwedish KronaUAE Dirham
Currency
Categories
delivery


On UK Orders Over £100
& low International Delivery Costs.

Audio Technica AT-OC9XSH Moving Coil Cartridge

« back
Home > Cartridges > Audio Technica Cartridges

AT-OC9XSH

Dual moving coil stereo cartridge with Shibata stylus

  • Features a Nude Shibata stylus and boron cantilever
  • Neodymium magnet and permendur yoke for increased magnetic energy
  • Features threaded inserts in the cartridge body
  • Aluminium body minimizes unwanted vibration for reduced resonance
  • PCOCC is used for the coils to achieve pure signal transmission
Model AT-OC9XSH
Mounting 1/2” centers / Threaded inserts
Frequency Response 20 to 47,000 Hz
Body Material Aluminium
Channel Separation 27 dB (1 kHz)
Output Channel Balance 1.0 dB (1 kHz)
Output Voltage 0.4 mV (at 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Shibata
Stylus Size 2.7 x 0.26 mil
Stylus Construction Nude square shank
Cantilever 0.28 mm Ø nude boron
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 20 x 10 – 6 cm / dyne
Dynamic Compliance 16 x 10 – 6 cm / dyne (100 Hz)
Terminal Pins Brass
Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance Min 100 Ohms
Cartridge Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included 1 non magnetic screw driver
1 brush
2 washers
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector

NOW: £570.00
Earn 570 Points with this purchase

Customer Reviews
Write an online review and share your thoughts with other shoppers!