£0.00View All
(0) Shopping Cart
US DollarEuroAustralian DollarIndian RupeeNorwegian KroneCanadian DollarPound SterlingYuan RenminbiNew Zealand DollarDanish KroneHong Kong DollarYenKenyan ShillingKuwaiti DinarRandSwiss FrancMalaysian RinggitMexican PesoNairaZlotyRussian RubleSaudi RiyalSwedish KronaUAE Dirham
Currency
Categories
delivery


On UK Orders Over £100
& low International Delivery Costs.

Audio Technica AT-OC9XSL M.C. Cartridge

« back
Home > Cartridges > Audio Technica Cartridges

AT-OC9XSL

The next Generation of the legendary OC9 cartridge series

Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Special Line Contact as featured in our flagship ART1000, this diamond profile offers the ultimate in accurate sonic reproduction with a sense of space and realism to all instruments that few other configuration can achieve.

  • Features Nude Special Line Contact stylus and boron cantilever with accurate tracking ability and high transient response
  • A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required 
  • Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer 
Model AT-OC9XSL
Mounting 1/2” centers / Threaded inserts
Frequency Response 20 - 50,000 Hz
Body Material Aluminium
Channel Separation 28 dB (1 kHz)
Output Channel Balance 0.5 dB (1 kHz)
Output Voltage 0.4 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Special Line Contact
Stylus Size 1.5 x 0.28 mil
Stylus Construction Nude rectangular shank
Cantilever 0.28 mm Ø nude boron
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 22 x 10 – 6 cm / dyne
Dynamic Compliance 18 x 10 – 6 cm / dyne (100 Hz)
Terminal Pins Brass
Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance Min 100 Ohms
Cartridge Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included 1 non magnetic screw driver
1 brush
2 washers
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector

NOW: £660.00
Earn 660 Points with this purchase

Customer Reviews
Write an online review and share your thoughts with other shoppers!