Trichord Research Phono Stages

Trichord Diablo GEN2 Never Connected PSU

£474.99 (ex. VAT)
You will earn 569 points with this purchase

Trichord Research Diablo Never Connected PSU is a significant power supply upgrade for the Trichord Diablo, which gives you an improvement in clarity and control, allowing your Diablo phono stage to reach its fullest sonic potential, as a reference level phono stage.  This power supply aesthetically matches the Diablo its enclosed in matching casing that looks perfect side by side.

To connect this power supply to your Diablo, simply remove the basic power supply and connect this Never Connected power supply to your Diablo using the Trichord interconnecting cable included. Includes an IEC socket (rather than encapsulated mains cable) so you can either use the standard UK mains cable included or any upgraded mains cable of your choice.

Pairing your Diablo with this Never Connected power supply will result in a much more transparent, open and natural sound with better clarity and control. If you thought the performance of the Diablo was fantastic, try the Never Connected power supply for the ultimate set-up.


  • PS: Massive 80VA toroidal transformer
  • Large Capacitor Bank: Yes
  • Voltage Regulators: Twin
  • Resistance (select): 33/100R, 1/47k
  • Capacitance (select): 100pF, 1n1
  • Gain (selectable): 48/52/63/70/74dB
  • Output Voltage: -0V, -/+22Vdc
  • Output Current: +/- 0.5 Amps DC
  • Output impedance: 33 Ohms
  • Drives: 10m of 150pF/m cable
  • DC-offset: <1mV, servo controlled
  • Mains Lead: 3 PIN IEC Moulded
  • Mains Volt: 230V (110V AC)
  • Dimensions (WDH): 117 x 190 x 55mm
  • Casework: Metal matches Diablo Phono
  • Brand:
    Trichord Research
  • Condition:
Not yet reviewed
Write an online review and share your thoughts with other shoppers!